What are the process requirements for nylon powder coated with steel ring adhesive?

Steel ring coated nylon powder is usually white, and there are several processing methods according to different processes, corresponding to different types of powder.

1. Pre coated wire is processed into a steel ring, represented by Belgian steel wire glue coating. The entire coil of wire is pre coated with fine nylon powder (10 micron-40 microns particle size) through high-frequency heating. Due to its fast wire speed, it can usually reach a speed of over 30 meters per minute. After powder coating, a second heating is required to assist in nylon melting and leveling. This process has production costs, but the equipment requirements for post formed steel rings are high. Our company's 78-1008A nylon powder can meet the production requirements of this process.

2. Vibration disc coating, this process is the same as the production of underwear buckles. The steel ring is coated with powder after forming, but the production efficiency is low. Our company's product 78-1008A is used more in this process.

3. Fluidized bed immersion coating of steel ring coated nylon powder, clamp both ends with a fixture, and immerse them in the fluidized powder by heating with a metal tin solution or high-frequency heating method. The exposed end of the fixture without powder coating is then sealed with a single point. Our company's corresponding process model is 70-1001.